The Deck Foot Anchor for frost protected structures gives you strength and security similar to a poured concrete footing without the labor, time and cost. Quickly and easily install ground anchored footings for decks, pergolas, sheds, ramps, cabins, camps, light additions, and more in minutes!
Rated for 5,000#'s please call if you are unsure of your post loads
If continuous torque is applied after hitting an obstruction, the auger may be damaged and become difficult to remove.
PLEASE ALLOW 1-3 BUSINESS DAYS FOR ORDER PROCESSING
Each KIT includes :
56" Solid Auger (5" Blade)
1" Diameter Tube
Post Connection (Post Saddle)- 4x4 or 6x6 - please select below
a few went in as expected. Most did not. Switch to auger and found large stones and roots that prevented the helical Piers from getting to full depth
B
Brandon
6x6
Helical screw pile
Great product with easy installation!
We’ve used quite a few and will be installing on most of our decks in the future.
Only issue was when reversing we stripped one of the heads when socket slipped off. Would be nice to have a pin you could insert if needed between socket and helical.
J
Jeffrey Rowe
6x6
Self install helical system
Overall pretty satisfied with the product. One of the posts 12 mm drive heads snapped off, but I was able to finish driving it with tightening the secondary bolts to one another and using a 7/8 socket
Choosing a selection results in a full page refresh.
Great solution to my 100 yr old 1st floor deflection issues. Numerous MEP obstacles made sistering the old joists inefficient. A bit of drilling/screwing but well worth it.
It is a good product. Well made pre-drilled and structural screws with it. Price was ok little high than I was hoping but I understand testing and all that. I will shop here again if I run into this situation again. Thank you
