1 5

Nolan-Engineered Roof Rafter Strengthening

Strengthen qualifying existing dimensional-lumber roof rafters using a steel reinforcement system selected for the member size, span, spacing, and loading.

Nolan Structural Products

Roof Rafter Strengthening Straps

Roof Rafter Strengthening Straps

$ 310.00 MXN
$ 310.00 MXN
$ 310.00/ft
Sale Sold out
Taxes included. Shipping calculated at checkout.
2×4 Through 2×12 Rafters Published Design Criteria Confirm Span and Loading
View full details

Engineered structural solution

Strengthen Existing Roof Rafters

A steel reinforcement system for qualifying dimensional-lumber rafters, supported by published design specifications and span criteria.

Application first

Confirm the Fit Before Ordering

Review the basic application and limits below. The current design report and installation instructions remain the technical source of truth.

01

Confirm member size

Match the system to the existing 2x4, 2x6, 2x8, 2x10, or 2x12 rafter.

02

Check span and spacing

Rafter size, species, grade, spacing, roof pitch, and loading affect suitability.

03

Use published criteria

Consult the current specifications or request engineering guidance for conditions outside the tables.

Technical note: Product selection depends on existing conditions. If the application falls outside the published criteria, contact Nolan Structural Products before ordering.

How the system works

Structural Reinforcement with a Clear Purpose

The steel reinforcement works compositely with the existing rafter to increase section properties and improve performance within the published span and loading criteria.

What arrives: Use the product option and “What’s included” information in the purchase area to confirm the exact components and fasteners supplied with the selected configuration.

Key technical points

Specifications at a Glance

Member sizes
2×4 through 2×12
Selection inputs
Size, span, spacing, species, grade, and loading
Published example loading
50 PSF ground snow; 10 PSF dead load
Reference
Current design specifications

Clear next steps

From Measurement to Installation

1. Measure and document.

Record the member size, span or opening, accessible length, and relevant project conditions.

2. Select the correct configuration.

Use the product options and the applicable report, chart, or table.

3. Install to current instructions.

Follow the complete fastening and installation requirements supplied for the product.

Need help selecting?

Not Certain How Many Straps You Need?

Send the project dimensions and a few clear photos. We’ll help identify the right product or tell you when the published solution does not fit.

Contact Nolan Structural Products