•
1 3

Nolan-Engineered Floor Stiffening

Reduce bounce and deflection with a made-to-order steel strap system selected for the accessible floor-joist length.

Nolan Structural Products

Floor Joist Stiffening Strap System - Reduce Floor Bounce and Deflection

Floor Joist Stiffening Strap System - Reduce Floor Bounce and Deflection

$ 310.00 MXN
$ 310.00 MXN
$ 310.00/ft
Sale Sold out
Taxes included. Shipping calculated at checkout.
Made to order Hardware included Length table available
View full details

Engineered structural solution

Reduce Floor Bounce and Deflection

Steel straps fasten to accessible floor joists to increase stiffness and reduce the movement that creates a bouncy-floor feel.

Application first

Confirm the Fit Before Ordering

Review the basic application and limits below. The current design report and installation instructions remain the technical source of truth.

01

Measure access

Measure the accessible joist length—not simply the room dimension.

02

Use the length table

Select the strap segments and connector plates specified for the measured joist length.

03

Confirm suitability

This system does not fit every floor assembly; ask before ordering if access or framing is unusual.

Technical note: Product selection depends on existing conditions. If the application falls outside the published criteria, contact Nolan Structural Products before ordering.

How the system works

Structural Reinforcement with a Clear Purpose

Steel straps fastened along the accessible joist length increase the reinforced member’s stiffness, reducing the deflection that occupants experience as floor bounce.

What arrives: Use the product option and “What’s included” information in the purchase area to confirm the exact components and fasteners supplied with the selected configuration.

Key technical points

Specifications at a Glance

Application
Accessible dimensional-lumber floor joists
Selection input
Accessible joist length
Strap segments
3 ft and 4 ft lengths with connector plates
Fasteners
1/4 × 1-1/2 in lag screws

Clear next steps

From Measurement to Installation

1. Measure and document.

Record the member size, span or opening, accessible length, and relevant project conditions.

2. Select the correct configuration.

Use the product options and the applicable report, chart, or table.

3. Install to current instructions.

Follow the complete fastening and installation requirements supplied for the product.

Need help selecting?

Not Certain How Many Straps you Need?

Send the project dimensions and a few clear photos. We’ll help identify the right product or tell you when the published solution does not fit.

Contact Nolan Structural Products