Click Here for the product design report provided by Nolan Engineering, PLLC.
Click Here to open chart to determine what size strap is needed.
The Joist Repair Strap is designed to repair notched, drilled or damaged floor joists without needing to remove any plumbing/wiring which may go through the joist. Our product provides an affordable, alternative solution to sistering the joist in order to restore the integrity of the joist and promote safety. Each kit consists of a steel strap that is ideally screwed to the bottom of the floor joists. If you don’t have access to the bottom of the joist, our product may still work. Please contact us for more information.
The Joist Repair Kit is great for both homeowners, contractors, and DIYers as it includes everything needed to install. Once the strap is installed it will fully restore the strength of the floor joist. There is an engineered design report available by using the link above that can be provided to a Building Department, if required. The Design Report is stamped by certified Engineers in multiple States and has been accepted by Building Inspectors across the United States and Canada.
The lag screws included are 1/4" by 1, 1/2" and will protrude out about an 1/8" from the steel.
**Please Note: This product will not work for every floor joist. Please contact us directly if you have any concerns if this product is the correct solution for you.**
Repair kit worked quite well, quality materials were obvious and the kit made the repair quicker and professionally addressed as it was advertised it would
Had an HVAC guy drill too close to the top of my joists under a kitchen island. Purchased 3 of these, even though I only had 1.5” of wood above the hole, these worked great.
It was easy to install the wall strap took me about 5 minutes each one. Must have a good hammer drill and impact gun will make it go smoother. So far I’m happy with the product
