Joist Repair Hole Reinforcer - 2x10

The joist reinforcement worked great and was easy to install. I used them to reinforce floor joists with a 4 inch hole for a toliet drain.

Repair kit worked quite well, quality materials were obvious and the kit made the repair quicker and professionally addressed as it was advertised it would

Had an HVAC guy drill too close to the top of my joists under a kitchen island. Purchased 3 of these, even though I only had 1.5” of wood above the hole, these worked great.

The brackets are the real deal. I had to slightly remove some material for Clarence and the metal is very strong. I asked the tech support if this was structurally ok and were very knowledgeable. My only complaint was only one drill bit for 2 kits and the bit broke when pre drilling.Also, was 7 screws short- it would have been nice to throw in a couple extras. I didn’t think it was a big deal but Lowe’s didn’t not have a structural screws that were even close. Un common size and short length, only thing close was Simpson strong tie but they were slightly longer and under sized.No instructions!!!! Like how deep to countersink. I had to remove some cross braces and found some steel ones on Home Depot’s online website which look and are stronger than the wood ones I had to remove.

This Joist Reinforcer was exactly what I needed to strengthen two 2"x10" joists that were weakened by an overzealous plumber. Installation was quick and easy with the provided pilot bit, driver bit, and fasteners. The only suggestion I can make is to mark the drill bit for depth so that the pilot holes don't go all the way through the joist. My first joist looks like swiss cheese from the back side, now. On the second joist I learned my lesson and left the pilot holes about 1/4" from clearing through the joist. It makes for a much cleaner look. Thanks for a great product!